Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

Toxicity of organic mixtures saturated in water to Daphnia magna. Effect of compositional changes

The toxicity of aqueous solutions saturated with mixtures of hydrophobic organic liquids is contrasted to that of solutions prepared from solids. Data for a variety of mixtures are presented and are related to the solubilities of the components. It is shown that in the absence of biological interactive effects, the toxicity of a component in a saturated mixture of liquids will be equal to or less than that of a corresponding solution of its most toxic component. In contrast, for solutions derived from a mixture of solids, the toxicity will equal or exceed that of a corresponding saturated solution of its most toxic component, and will tend to increase with the complexity of the mixture.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

OPTIMAL RESERVOIR MANAGEMENT AND CROP PLANNING UNDER DETERMINISTIC AND STOCHASTIC INFLOWS1

ABSTRACT: This study analyzes planning under deterministic and stochastic inflows for the Mayurakshi project in India. Models are developed to indicate the optimal storage of reservoir water, the transfer of water to the producing regions, and the spillage of water from the reservoir, if needed. A deterministic programming model was first formulated to represent the existing situation. A chance-constrained model then was constructed to evaluate potential violations of the deterministic model. Both models were quantified for the command area. Data were collected from surveys of the area and from government agencies. Both the deterministic and change-constrained models suggest a more intensive cropping program in the region. Both emphasize more dependence on rabi and less on kharif crops. The chance-constrained especially suggests use of more water in the rabi season. Important chances in cropping programs and labor use take place under the chance-constrained model.     

Influence of mass transfer characteristics for DNAPL source depletion and contaminant flux in a highly characterized glaciofluvial aquifer

The transfer of contaminant mass between the nonaqueous- and aqueous-phases is a process of central importance for the remediation of sites contaminated by dense nonaqueous-phase liquids (DNAPLs). This paper describes a comparison of the results obtained with various alternative DNAPL-aqueous-phase mass transfer models contained in the literature for predicting DNAPL source-zone depletion times in groundwater systems. These dissolution models were largely developed through laboratory column experiments. To gain insight into the implications of various representations of the local-scale kinetic as well as equilibrium DNAPL dissolution processes, aquifer heterogeneity and the complex architecture of a DNAPL source-zone, the aqueous-phase contaminant concentrations and mass fluxes arriving at a down-gradient compliance boundary are analyzed in a conditional stochastic framework. The hydrogeologic setting is a heterogeneous fluvial aquifer in Southwest Germany, referred to as the aquifer analog dataset, that was intensively characterized in three dimensions for hydrogeological parameters that include permeability, effective porosity, grain size, mineralogy and sorption coefficients. By embedding the various dissolution models into the compositional, multiphase flow model, CompFlow, the relative times predicted for complete depletion of a released DNAPL source due to natural dissolution are explored. Issues related to achieving environmental benefits through, for example, partial DNAPL-zone source removal via enhanced remedial technologies are also discussed. In this context, performance metrics in the form of peak aqueous-phase contaminant concentrations and mass fluxes arriving at a down-gradient compliance boundary are compared to each other. This is done for each of the alternative mass transfer models. A significant reduction in the fractional flux at a downstream location from the DNAPL source can be achieved by partial source-zone mass reduction; however, peak concentration levels at the same location remain much higher than the United States Environment Protection Agency (US-EPA) drinking water limits. Although groundwater quality was found to improve more rapidly for the equilibrium dissolution model, it is also shown that dissolution models that promote rapid DNAPL disappearance produce greater prediction uncertainty in the aqueous-phase flux reduction.     

New Route for Devulcanization of Natural Rubber and the Properties of Devulcanized Rubber

Devulcanization of natural rubber (NR) compound was carried out by means of benzoyl peroxide as a devulcanizing agent by two different techniques namely (a) chemical process and (b) mechano-chemical process. Furthermore, the effects of time and concentration of devulcanizing agent on the devulcanization process were investigated. The extent of devulcanization of natural rubber was studied by estimation of percent devulcanization, volume fraction of rubber after swelling, Mooney viscosity and crosslinked density. The devulcanized natural rubber obtained from mechano-chemical process was blended with virgin natural rubber in different proportions. The mechanical properties and morphology of the revulcanized blends were examined and found to be interesting. Thus, waste rubber could be reused successfully by this technique.     

Improved space–time forecasting of next day ozone concentrations in the eastern US

There is an urgent need to provide accurate air quality information and forecasts to the general public and environmental health decision-makers. This paper develops a hierarchical space–time model for daily 8-h maximum ozone concentration (O₃) data covering much of the eastern United States. The model combines observed data and forecast output from a computer simulation model known as the Eta Community Multi-scale Air Quality (CMAQ) forecast model in a very flexible, yet computationally fast way, so that the next day forecasts can be computed in real-time operational mode. The model adjusts for spatio-temporal biases in the Eta CMAQ forecasts and avoids a change of support problem often encountered in data fusion settings where real data have been observed at point level monitoring sites, but the forecasts from the computer model are provided at grid cell levels. The model is validated with a large amount of set-aside data and is shown to provide much improved forecasts of daily O₃ concentrations in the eastern United States.     

Kinetics of oxidation of methylhydrazines in water. Factors controlling the formation of 1,1-dimethylnitrosamine

The kinetics of oxidation of methylhydrazine ($\text{MMH}$) and 1,1-dimethylhydrazine ($\text{UDMH}$) by dissolved oxygen in water has been measured at various acidities as a function of catalyst (cupric ion) concentration. In dilute solutions the oxidation occurs through a cupric ion catalyzed process as well as by an uncatalyzed step. The extent of formation of nitrosodimethylamine ($\text{NDMA}$) depends upon the initial $\text{UDMH}$ concentration. In dilute solutions $\text{NDMA}$ is not formed, but in more concentrated solutions, $\text{NDMA}$ formation increases with increasing $\text{UDMH}$ content, reaches a maximum at 60–80% $\text{UDMH}$ (by volume) and then decreases. The $\text{NDMA}$ yield appears to approximately parallel the viscosity of the medium, and it is speculated that the factors which control viscosity may also be responsible for governing $\text{NDMA}$ formation.     

Hydrodynamics and turbulence in emergent and sparsely vegetated open channel flow

This present study reports the results of an experimental study characterizing thorough variation of turbulent hydrodynamics and flow distribution in emergent and sparsely vegetated open channel flow. An emergent and rigid sparse vegetation patch with regular spacing between stems along the flow and transverse directions was fixed in the central region of the cross-section of open channel. Experiments were conducted in subcritical flow conditions and velocity measurements were obtained with an acoustic Doppler Velocimetry system. Large variations of the turbulence intensities, Reynolds shear stress, turbulent kinetic energy and vortical motions are found in and around the vegetation patch. At any cross-section through the interior of the vegetation patch, streamwise velocity decreases with increase in streamwise length and the velocity profiles converge from the log-law to a linear profile with increasing slope. Time-averaged lateral and vertical velocities inside the vegetation patch increase with increasing streamwise distance and converge from negative values to positive values. Turbulence intensities interior of the sparse vegetation patch are more than those of without the vegetation patch. Similar to the trend of streamwise velocity profiles inside the vegetation, turbulence intensities and longitudinal-normal Reynolds shear stress profile decreases with streamwise direction. In the interior of the vegetation patch and downstream of the trailing edge, turbulent kinetic energy profiles are exhibiting irregular fluctuations and the maximum values are occurring in the outer layer. Analysis of flow distribution confirms sparse vegetation patch is inducing a serpentine flow pattern in its vicinity. At the leading edge, flow is rushing towards the right hand sidewall, and at the trailing edge, flow is turning to the left hand sidewall. In between the leading and trailing edges, the streamlines are following a zig-zag fashion at varied degree along the streamwise and lateral directions. Immediate upstream of the leading edge and in the interior of the vegetation patch, vortex motion is clearly visible and the vortices are stretched along the width of the channel with streamwise direction.     

Association of retreating monsoon and extreme air pollution in a megacity

The world's top ranked mega city Delhi is known for deteriorated air quality. However, the analysis of air pollution data of 5 years (2014–2018) reveals that years 2016 and 2017, which were marked by an unusual delayed withdrawal of monsoon, witnessed an unprecedented extreme levels of toxic PM_2.5 particles (≤2.5 µm in diameter) touching a peak level of $～$760 µg/m³ (24 hr average), immediately after the monsoon retreat, surpassing WHO standards by $～$30 time and Indian national standards by $～$12 times, jeopardising lives of its citizens. However, the normal monsoon withdrawal years do not show such extreme levels of pollution. The high resolution WRF-Chem model along with meteorological data are used in this work to understand that how the delayed monsoon withdrawal and associated vagarious anti-cyclonic circulation resulted in trapping externally generated pollutants ceaselessly under colder conditions, leading to historic air quality crisis in landlocked mega city in these selected years. The sensitivity analysis confirmed that when WRF-chem model forced the climatology of normal monsoon year (2015) to simulate the pollution scenario of 2016 and 2017 for the above time period, the crisis subsided. Present findings suggest that such unusual monsoon patterns are on the hook to spur extreme pollution events in recent time.